Hollyland Solidcom C1-HUB8S Full-Duplex Wireless DECT Intercom System with 9 Headsets and HUB Base (1.9 GHz)
$3,799.00
- 9-Person Full-Duplex Wireless Intercom System
- 1.9 GHz DECT Wireless Technology
- Up to 1000 ft / 350 m Line-of-Sight Range
- 8 Wireless Remote Headsets + 1 Wired HUB Headset
- True-Wireless Design with No Beltpacks Required
- A/B Communication Group Support
- 2-Wire, 4-Wire, RJ45 Network & UAC Interfaces
- 4-Wire Analog & IP Digital System Cascading
- Approx. 10-Hour Remote Headset Runtime
- 16 Rechargeable Batteries & Charging Case Included
In stock (can be backordered)
Description
Hollyland Solidcom C1 HUB8S Full-Duplex Wireless Intercom System
The Hollyland Solidcom C1 HUB8S is a full-duplex wireless DECT intercom system featuring eight single-sided remote wireless headsets and a HUB base with a wired headset. Operating in the 1.9 GHz band, the system provides a transmission range of up to 1000 ft / 350 m line-of-sight and uses a true-wireless design that requires no beltpack.
Highlights
- Full-duplex wireless DECT intercom system
- 8 single-sided remote wireless headsets
- 1 wired 3.5mm HUB headset
- 1.9 GHz DECT frequency band
- Up to 1000 ft / 350 m line-of-sight transmission range
- Less than 35 ms transmission latency
- A and B communication group support
- True-wireless headset design with no beltpack required
- 2-wire audio input and output
- 4-wire audio input and output
- RJ45 network connectivity
- UAC interface
- PGM audio input
- 4-wire analog and IP digital cascading
- Approx. 10-hour remote headset runtime
- 16 rechargeable batteries included
- Charging case included
Product Description
The Solidcom C1 HUB8S provides full-duplex wireless communication for a team using eight remote wireless headsets together with a wired headset connected directly to the HUB base. The remote headsets operate without beltpacks, providing a self-contained wireless communication solution.
The system operates in the 1.9 GHz DECT frequency band and provides a line-of-sight transmission radius of up to 1000 ft / 350 m. Transmission latency is less than 35 ms, while the specified frequency response is 150 Hz to 7 kHz.
The HUB base provides extensive connectivity for integration with other communication systems. Interfaces include PGM audio input, 2-wire audio input and output, 4-wire audio input and output, RJ45 network connectivity, UAC, USB, and a 3.5mm headset connection.
The HUB supports A and B communication groups. Individual remote headsets can join or exit the corresponding group, while the wired HUB headset can also participate in Group A or Group B communication. The HUB also provides an ANNOUNCE function for system-wide communication.
For expanded installations, multiple Solidcom C1 systems can be cascaded. The HUB supports both 4-wire analog and IP digital signal cascading. Two systems can be connected through the 4-wire interface, while IP network cascading is recommended for configurations using three systems.
The HUB base can be powered from the supplied 12V/2A DC adapter or compatible NP-F battery. Depending on the actual product configuration, the HUB can also provide a V-Mount/G-Mount battery plate.
Each remote headset uses a 700mAh lithium-ion battery and provides approximately 10 hours of runtime. The package includes 16 rechargeable batteries and a charging case, allowing additional batteries to be kept ready for extended production sessions.
Technical Specifications
| System | Full-Duplex Wireless DECT Intercom |
| Wireless Headsets | 8 Remote Single-Sided Headsets |
| HUB Headset | 1 x 3.5mm Wired Headset |
| Frequency Band | 1.9 GHz DECT (Varies by Country and Region) |
| Operating Range | 350 m / 1000 ft Line-of-Sight |
| Modulation | GFSK |
| Transmit Power | <21 dBm / 125.9 mW (Varies by Country and Region) |
| Receiving Sensitivity | <-90 dBm |
| Transmission Latency | <35 ms |
| Frequency Response | 150 Hz to 7 kHz |
| Signal-to-Noise Ratio | >55 dB |
| Distortion | <1% |
| Microphone Type | Electret |
| Maximum Input SPL | >115 dB SPL |
| Output SPL | Typical 98 ± 3 dB SPL |
| Battery | 700 mAh / 2.66 Wh Lithium-Ion |
| Remote Headset Runtime | Approx. 10 Hours |
| Charging Time | Approx. 2.5 Hours |
| HUB Interfaces | 3.5mm Headset, USB, PGM Audio Input, 2-Wire I/O, RJ45 Network, 4-Wire I/O, UAC |
| HUB Power Options | 12V/2A DC, NP-F Battery, V-Mount/G-Mount Battery (Depending on Configuration) |
| HUB Base Net Weight | Approx. 1300 g / Antennas Excluded |
| Headset Weight | Approx. 170 g / Battery Included |
| Operating Temperature | 0 to +45°C |
| Storage Temperature | -20 to +60°C |
In the Box
- 1 x Hollyland Solidcom C1 HUB Base
- 8 x Remote Headsets with Blue Nameplate
- 1 x 3.5mm HUB Headset with Red Nameplate
- 1 x Charging Case
- 16 x Rechargeable Batteries
- 9 x Microphone Cushions
- 2 x 12V/2A DC Adapters
- 9 x Over-Ear Cushions
- 1 x USB Type-A to Type-C Cable
- 4 x High-Gain Antennas
- 1 x Storage Case
- 1 x Quick Guide
- 1 x Warranty Card
Additional information
| Weight | 22 lbs |
|---|---|
| Dimensions | 22 × 19 × 10 in |
